FTP and Camera Control

12.17.189.47:8084

Retrieve Latest Image
Channel 0
Channel 1
Channel 2
Channel 3
0 - 1 sequence.
0 - 1 - 2 sequence.
0 - 1 - 2 - 3 sequence.
Changing channel will not update image to that channel immediately. Refresh image.

Show Motion Detector Setting.

Show channel (camera).
Show Photo Numbers.

Set up FTP

Stop Motion Detect. Do this before changing the FTP settings.
Set the cameras to monitor (channels) using the links above.
Set NTP time server. (time-a.nist.gov, PST, 1 hour).
Set FTP server - server address, login, and upload interval.
Enable Motion Detect. Do this after changing the FTP settings to start uploading.

Other useful commands
Display the status of the server.
Reboot IP9100A. Required after changing IP address or ports. Leaves other settings unchanged.
Reset to Factory Default. The IP address will probably change. All settings will be in the default state as if the hardware reset button was pressed.
Set http ports. Set internal web server ports.
Get Firmware Version date.

	Retrieve Latest Image Channel 0 Channel 1 Channel 2 Channel 3 0 - 1 sequence. 0 - 1 - 2 sequence. 0 - 1 - 2 - 3 sequence. Changing channel will not update image to that channel immediately. Refresh image.

Show Motion Detector Setting.	Show channel (camera). Show Photo Numbers.
Set up FTP Stop Motion Detect. Do this before changing the FTP settings. Set the cameras to monitor (channels) using the links above. Set NTP time server. (time-a.nist.gov, PST, 1 hour). Set FTP server - server address, login, and upload interval. Enable Motion Detect. Do this after changing the FTP settings to start uploading. Other useful commands Display the status of the server. Reboot IP9100A. Required after changing IP address or ports. Leaves other settings unchanged. Reset to Factory Default. The IP address will probably change. All settings will be in the default state as if the hardware reset button was pressed. Set http ports. Set internal web server ports. Get Firmware Version date.